DIFFERENTIAL INSPECTION: Out Of Axle Housing

From Eaglepedia
Revision as of 04:37, 21 July 2006 by GilSX4 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Inspection Out Of Axle Housing

1.- Rotate the ring gear and check for broken, chipped or worn teeh. Check the differential for rough movement. Repair differential if these conditions are found.

2.- Inspect all bearings and cups for pitting, galling, flat spots or cracks. Replace as necessary.

3.- Check the differential case for an elongated or enlarged pinion mate shaft bore.

4.- Inspect the machined thrust washer surface areas for nicks, gauges, cracks or burrs.

5.- Check the case for cracks or other damage. Replace the case if any of these conditions are found.


TIGHTENING TORQUES

http://img.photobucket.com/albums/v198/Gilspix/AMC%20Diagrams/Differentialtable1.jpg

Retrieved from "http://amceaglesnest.com/guide/index.php?title=DIFFERENTIAL_INSPECTION:_Out_Of_Axle_Housing&oldid=3546"